All your carpet, tile and upholstery needs met in one place

Why is AM team’s Signature Carpet Cleaning done the best and what is included?

Unlike a standard steam clean, where the carpet fibers are cleaned with strokes one way, our Signature Clean cover all sides of the fibe. We don’t just use the steam wand, but also a rotary agitating, cleaning and buffing machine:

What is included?

1. Pre-Inspection – we will conduct a pre-inspection of your carpet. This will enable

us to conduct fibre identification, survey any spots and stains and evaluate any

existing problems with your carpet.

2. Pre-Vacuum – we will pre-vacuum your carpets with a commercial upright

vacuum with a hepa filter to remove any dry soil & debris from your carpet prior

to cleaning.

3. Pre-condition/Pre-spot – pre-conditioners and pre-spot treatments will be

applied heated to your carpets to allow it to start to break down soiling and treat

any spots.

4. Rotary Agitation – Rotary agitation using a special agitation pad is carried out on

your carpets to loosen any dirt and soiling in the carpet

5. Furniture moving – we shift all furniture that is requested.

6. Steam Clean – We will steam clean your carpets using our state of the art

cleaning equipment by using a carpet wand. AM Team has invested over

$150,000 in this equipment so we can ensure that we are able to utilise higher

heat, larger extraction power and more rinsing ability. The high quality of the

equipment that we are using ensures that we are able to guarantee great results

with cleaner and dryer carpets for you.

7. Deodorise & Neutralise – This will leave your carpets smelling clean and fresh and

removes the sticky residue that may be left as part of the cleaning process

8. Dry Padding – We will rotary dry pad your carpets to ensure there is no additional

moisture and reduce the drying time. This also aids in picking up any remaining

remnants of soiling and brightens your carpets leaving them up to 20% cleaner.

9. Furniture moving – we move all furniture back in its place.

10. Grooming – grooming is our final step and it will ensure we leave your carpet

looking fantastic. This will remove any cleaning & machine marks while

enhancing the drying process.

To achieve the best clean to your tiles AM Team follows the below steps:

1. Pre-inspection – We will conduct a careful assessment of your tiled areas to determine the type of tiles laid at your property and determine the best cleaning method.

2. Pre-Clean – We will then sweep the area to remove any loose dirt and debris prior to

cleaning.

3. Pre-Treatment - Pre-Treatments will be applied to your tiles to allow it to start to break down soiling. Based on the type of tiles that are installed there are different solutions that are able to be used to ensure the best finished results for your tiles.

4. Agitation of the grout to loosen dirt and buildup

5. High Pressure Steam Cleaning - We will clean your tiled surfaces using our efficient and high quality state of the art equipment by using high temperature and high pressure steam.

   This machine is highly efficient and has revolutionised tile cleaning. This is so we can ensure that we are able to utilise higher heat, larger extraction power and more rinsing ability. The high quality of the equipment that we are using ensures that we are able to guarantee great results for your tiles and a super clean.

6. Drying - The tile surfaces are dry mopped with towels and then blow-dried using high-

speed air movers.

Traditional steam cleaning gets done with a carpet wand. It is recommended for carpets that are regularly steam cleaned and maintained. This is the go to cleaning process for move-out cleans today.

1. Pre-Inspection – we will conduct a pre-inspection of your carpet. This will enable us to conduct fibre identification, survey any spots and stains and evaluate any existing problems with your carpet.

2. Pre-Vacuum – we will pre-vacuum your carpets with a commercial upright vacuum with a hepa filter to remove any dry soil & debris from your carpet prior to cleaning.

3. Pre-condition/Pre-spot – pre-conditioners and pre-spot treatments will be applied heated to your carpets to allow it to start to break down soiling and treat any spots.

4. Steam Clean – We will steam clean your carpets using our state of the art cleaning equipment by using a carpet wand. AM Team has invested over $100,000 in this equipment so we can ensure that we are able to utilise higher heat, larger extraction power and more rinsing ability.

5. Deodorise & Neutralise – This will leave your carpets smelling clean and fresh and removes the sticky residue that may be left as part of the cleaning process.

6. Grooming – grooming is our final step and it will ensure we leave your carpet looking fantastic. This will remove any cleaning & machine marks while enhancing the drying process.

There is no job too big or small. Below are the steps involved in most of our upholstery cleaning processes:

1. Pre-inspection – Identification of fabric fibre, fabric evaluation, colour fastness testing, spot and stain surveying and professional advice.

2. Dry soil removal – Using a vacuum cleaner with a HEPA filter we will then pre-vacuum your upholstery to remove any dirt and debris prior to cleaning.

3. Pre-conditioning and spotting – We apply a heated detergent and immediately it starts working to break down sweat and soil. We make use of a range of pre-conditioners, depending on the type of fabric.

4. Agitation – Agitation is done using a soft brush, sponge or pad. It breaks down body fats, oils and soil.

5. Steam Clean – We will steam clean your upholstery using our state of the art cleaning equipment. AM Team have invested over $150,000 in this equipment so we can ensure that we are able to utilise higher heat, larger extraction power and more rinsing ability. The high quality of the equipment that we are using ensures that we are able to guarantee great results with cleaner and dryer upholstery for you.

6. Deodorising and neutralising – This will leave your upholstery smelling clean and fresh and removes the sticky residue that may be left as part of the cleaning process.

7. Towelling – Towel drying is carried out to remove the last standing soil and moisture from the fabric.

8. Groom: A thorough grooming of the upholstery will be conducted using grooming tools. This will lift the pile and have your furniture looking great while assisting to speed the drying time.

9. Drying - Before we leave, we use high-speed air movers to make your upholstery completely dry and ready to use.

10. OPTIONAL- Fabric Protection